UVTECH SYS

  • Water
    Treatment
    Plants









  • Bottle
    Filling
    Machines









  • Blow
    Moulding
    Machines









  • Shrink
    Wrapping
    Machines









  • Jar
    Filling
    Machines









  • Sleeve
    Labeling
    Machines








Automatic Bottle Filling Machine


In our Automatic mineral water bottle filling machine, U.V. Tech Systems, India make Rinser Filler Cappers are designed for optimum speeds based on 1 litre pack size. We have capacities ranging from 40 bottles /minute to 200 bottles /minute. The material of construction is SS 304 for the Frame and outer panel. All Wetted Parts are in SS 316. The Human Machine Interface is PLC with Touch Screen Control that makes the machine user friendly. The machine is equipped with features viz.. no bottle /no fill , no bottle /no cap, low fill / no cap. One more salient feature is the Cap sorter which ensures that the caps are fed only in the right orientation. The caps of wrong orientation are sorted and are sent back to the cap sorter thro a drop down mechanism.

Automatic Bottle Filling Machine - Rinsing

The bottles are fed into the air conveyor were the bottles are guided into the first turn table which sets up the alignment for the bottle to be transferred to the rinsing section. The air conveyor is also designed so that it can be directly integrated to a Fully Automatic Blowing Machine. In the rinsing section the bottle is turned thro 180deg thro a bottle inverting guide equipped with flexible joint and is rinsed thro a jet of water at 3 bar. At the rinsing table the water jets out only thru three Nozzles, the rest of the movement thro the rinsing table is for a Drip cycle where the Left out Water particles drips out from the bottle. The rinsed Bottle is then Passed on to the Filling section after passing thro an Inter mediate Turn table.

Automatic Bottle Filling Machine - Filling

In our Automatic mineral water bottle filling machine, The bottles are then passed on to the filling section. The filling section is equipped with spring loaded nozzles. Once the bottles are picked they spring loaded nozzles are activated by a Drum Cam Mechanism. Since the machine is equipped with gravity filling the accuracy of filling is maintain as there is no foaming. The filling nozzles are made of SS316 and the Filler tank is completely electro polished and this reduced possibilities of Microbial growth.

Bottle filling and capping machine

In our Automatic mineral water bottle filling machine, the fill level sensor and the bottle sensors give the signal to the pneumatic latch the cap is released for capping. The entire capping is done by a “pick and place mechanism”. The capping chute is so design that the caps of the right orientation only are passed on to the cap conveyor. The other caps are sent back to the chute through a ‘Fall Out Mechanism’. The caps chuck are spring loaded and is equipped with magnetic torque controller, this prevent capped bottles are released into the slat conveyor for labeling and packing. One more additional feature of the bottle release mechanism is the Jump release into the conveyor by this the bottles are released into the conveyor with a slight Jump like agitation which ensure the cap internal are wetted with ozonated water thereby ensuring complete disinfection of the cap as well.
U V TECH SYSTEMS
No 24,Ist Floor, Dr.Ambedkar Road,Kodambakkam, Chennai – 600 024, Tamil Nadu, India
No:4,4th Cross, 4th Main,Jayanagar, Ist Block,Byrasandra(E) , Bangalore – 560 011 , Karnataka , India
Door.No:57 – 1 -21,Shop.No:5, Veerapaneni Plaza, M.G.Road, Patamata, Vijayawada - 520 010 , Andhra Pradesh , India
No:32/1573,Ist Floor, Opp.EMC Hospital,NH By-Pass Vennala(Po),Palarivattom, Cochin-682 025 , Kerala , India
No:5/A,Rajalaxmi Building, Boriveli (West), Mumbai - 400 091 , Maharashtra , India